QS3245SOG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 8 |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Family | 3245 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 4.5 ns |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3245SOG Overview
Providing this information in the SOIC enables digital switch board space to be saved.There is a design for terminating 20 as part of its basic configuration.The multiplexer's system is supplied with a voltage of 5V.Signal switch has 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.This multiplexer ic is configured with 20 pins.The mounting point is Surface Mount.The logic switch belongs to the family of 3245.Signal multiplexer consists of 8 bits.A power supply is provided for mux switch's normal operation of 5V.This is a signal switch that is categorized as Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic since it is not affected by external factors.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.With a resistance of 15Ohm, it operates.85°C is an acceptable maximum temperature for this signal switch.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.25V.According to its specifications, the digital swith requires a minimum supply voltage of 4.75V.Additionally, it improves the characteristics of TTL COMPATIBLE BUS SWITCH.In terms of logic ICs, it uses BUS DRIVER.
QS3245SOG Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
QS3245SOG Applications
There are a lot of Integrated Device Technology (IDT) QS3245SOG Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- Metal detectors
- Telephone network
- Logic gates for other digital devices
- Time division multiplexing system
- D/A converters
- Enabling different functions units in microprocessor instruction decoding
- Data bus control
- Recording transmission
- Injectors
