QS3245SOG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Packaging | Cut Tape |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 8 |
| Propagation Delay | 5.6 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Supply Type | Single |
| Turn-Off Delay Time | 4.5 ns |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3245SOG8 Overview
Due to the fact that it is provided in the SOIC, digital switch allows the board to be compacted.In this case, it is packaged as Cut Tape.Among its basic configurations are 20 terminations.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has a total of 20 component pins.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.It is configured with 20 pins.The mounting is in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 8 bits available.The power supply of 5V is provided for mux switch's normal operation.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 3μA current.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.This signal switching operates at a resistance of 2.With a resistance of 15Ohm, it operates.The maximum temperature for this signal switch is 85°C.Temperatures of the multiplexer should be kept at -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.25V.A minimum supply voltage of 4.75V is required to operate the digital swith.Also, it provides an improved version of the characteristics of TTL COMPATIBLE BUS SWITCH.In terms of logic ICs, it uses BUS DRIVER.
QS3245SOG8 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
QS3245SOG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3245SOG8 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Small scale TV wall
- Implementing boolean functions with multiple variables
- Used to connect a single source to multiple destinations
- High-performance memory systems
- PCIe
- Data collection system
- Speed synchronization of multiple motors in industries
- Data distribution
- Injectors
