QS3251QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Weight | 288.002805mg |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Peak Reflow Temperature (Cel) | 260 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 500mW |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.6 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Number of Input Lines | 8 |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3251QG8 Overview
In order to conserve board space, digital switch is included in the QSOP.There are 16 component pins in this turn signal switch.In this case, the supply type is Single.It is configured with 16 pins.The mounting is in the way of Surface Mount.In order to maintain mux switch's normal operation, power is provided to 5V.As part of the operation of this turn signal switch, there are 8 outputs.This is an the digital switch ic that is classified as Other Logic ICs.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.Voltage levels are accepted through 8 input lines of multiplexers.The maximum temperature for this signal switch is 85°C.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.25V.Device specifications require that the minimum supply voltage is 4.75V.The mux switch configuration consists of 1 elements.
QS3251QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
8 input lines
QS3251QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3251QG8 Signal Switches / Multiplexers / Decoders applications.
- Automation system
- LVDS
- Memory chips
- Microprocessor memory systems
- GLAN
- Code converters
- Control unit of Central Processing unit (CPU)
- Night vision cameras
- HDMI applications
- Combinational circuit
