Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
QSOP |
Number of Pins |
16 |
Packaging |
Tape & Reel |
Published |
2009 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Other Logic ICs |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Number of Ports |
2 |
Power Dissipation |
500mW |
Number of Bits |
8 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
6.6 ns |
Family |
3253 |
Logic Function |
Demultiplexer, Multiplexer |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
Logic IC Type |
BUS EXCHANGER |
High Level Output Current |
-120mA |
Low Level Output Current |
120mA |
Number of Input Lines |
4 |
Number of Output Lines |
1 |
Length |
4.9mm |
Width |
3.8mm |
Thickness |
1.47mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
QS3253QG8 Overview
In order to conserve board space, digital switch is included in the QSOP.The package is packaged in the manner of Tape & Reel.The basic configuration includes 16 terminations.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.Its supply type is Single, which is used as the source of power.It is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.In the 3253 family, the logic switch is included.Signal multiplexer provides 8 bits.In order for 5V to operate normally, a power supply is provided.The digital switch ic is a part of an electronic system classified as Other Logic ICs.There are no external influences on this multiplexer ic, so it consumes 3μA current.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.With a resistance of 0, it operates.It is possible to accept voltage levels by using one of the 4 input lines of multiplexers.Signal sources consist of output lines of 1.At 85°C, the maximum operating temperature of this signal switch is acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.The device is specified to operate at the maximum supply voltage of 5.25V in accordance with its applicable specification.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 4.75V.It employs BUS EXCHANGER as its logic IC.
QS3253QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 input lines
1 output lines
BUS EXCHANGER as the logic IC
QS3253QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3253QG8 Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- RF-based home automation system
- Arithmetic Logic Units
- Relay
- Make full adder
- Microprocessor instruction decoding
- Computer memory
- A robotic vehicle with the metal detector
- Data demultiplexing
- Data transfer