banner_page

QS3257QG

16 Pin Signal switch4 OutputsMin 4.75V VMax 5.25V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-QS3257QG
  • Package: QSOP
  • Datasheet: PDF
  • Stock: 111
  • Description: 16 Pin Signal switch4 OutputsMin 4.75V VMax 5.25V V(Kg)

Details

Tags

Parameters
Moisture Sensitivity Level (MSL) 1
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Other Logic ICs
Peak Reflow Temperature (Cel) 260
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 16
Number of Outputs 4
Operating Supply Voltage 5V
Power Supplies 5V
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Power Dissipation 500mW
Number of Bits 8
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 5.2 ns
Logic Function Demultiplexer, Multiplexer
Supply Type Single
High Level Output Current -120mA
Low Level Output Current 120mA
Number of Input Lines 2
Number of Output Lines 1
Length 4.9mm
Width 3.8mm
Thickness 1.47mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Package / Case QSOP
Number of Pins 16
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active

QS3257QG Overview


Digital switch is provided in the QSOP for the purpose of saving board space.This turn signal switch has a total of 16 component pins.This supply type employs Single.The board has 16 pins configured.Surface Mount is the way it is mounted.In this signal multiplexer, there are 8 bits that are provided.During mux switch's normal operation, 5V is provided with a power supply.For the turn signal switch's operation, there are 4 outputs.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.In the absence of external influences, it consumes 3μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.As a voltage level input, the multiplexers have 2 lines.As the signal source, there are 1 output lines.The signal switch can operate at a maximum temperature of 85°C.A temperature of the multiplexer of -40°C should be maintained for minimal operation.The device is specified to operate at the maximum supply voltage of 5.25V in accordance with its applicable specification.Typical device specifications specify a voltage supply of 4.75V for the digital swith.

QS3257QG Features


Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
1 output lines

QS3257QG Applications


There are a lot of Integrated Device Technology (IDT) QS3257QG Signal Switches / Multiplexers / Decoders applications.

  • Textile mills
  • Combinational circuit
  • Injectors
  • Electronic circuits
  • Memory system of computers
  • Used to connect a single source to multiple destinations
  • Electronics industry
  • Image transmission
  • Implementing boolean functions with multiple variables
  • Encrypted communications system

Write a review

Note: HTML is not translated!
    Bad           Good