QS32X2245Q2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 40 |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Resistance | 40Ohm |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 920mW |
| Number of Ports | 2 |
| Nominal Supply Current | 6μA |
| Number of Bits | 16 |
| Propagation Delay | 1.25 ns |
| Quiescent Current | 6μA |
| Turn On Delay Time | 6.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 2 |
| Length | 9.9mm |
| Width | 3.81mm |
| Thickness | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS32X2245Q2G Overview
The basic configuration includes 40 terminations.The multiplexer's system is supplied with a voltage of 5V.There are 40 component pins in this turn signal switch.It is the end of conductors that is represented by GULL WING.Single is used as its supply type.This multiplexer ic is configured with 40 pins.The mounting is in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 16 bits provided.During mux switch's normal operation, 5V is provided with a power supply.This is a signal switch that is categorized as Bus Driver/Transceivers.Without the influence of external factors, it consumes 6μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The signal switching operates with a resistance of 2.In terms of resistance, it has a value of 40Ohm.In this case, operating this signal switch at 85°C is acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.Device specifications specify 5.25V as the maximum supply voltage for the signal switches.A minimum supply voltage of 4.75V is specified for the digital swith in accordance with its applicable specifications.In terms of logic ICs, it uses BUS DRIVER.
QS32X2245Q2G Features
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS32X2245Q2G Applications
There are a lot of Integrated Device Technology (IDT) QS32X2245Q2G Signal Switches / Multiplexers / Decoders applications.
- VGA
- Data demultiplexing
- Home automation system
- Control unit of Central Processing unit (CPU)
- Communication system
- Make half adder
- Electronic circuits
- LVDS
- Code converters
- Data bus control
