QS32X245Q2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 40 |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 920mW |
| Number of Ports | 2 |
| Nominal Supply Current | 6μA |
| Number of Bits | 16 |
| Propagation Delay | 250 ps |
| Quiescent Current | 6μA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 2 |
| Length | 9.9mm |
| Width | 3.81mm |
| Thickness | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
QS32X245Q2G Overview
In order to save board space, digital switch is located in the QSOP.Among its basic features are 40 terminations.The voltage supplied for multiplexer's system is 5V.multiplexer's systemSignal switch has 40 component pins.It is the end of conductors that is represented by GULL WING.In this case, Single is employed as the supply type.The board has 40 pins configured.It is positioned in the direction of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.There are 16 bits signal multiplexer provides.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 6μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.2 ports are used for some other peripheral signal switchings to plug in.A resistance of 15Ohm is used to operate it.85°C is an acceptable maximum temperature for this signal switch.The minimal operating temperature of the multiplexer should be maintained at -40°C.The device is specified to operate at the maximum supply voltage of 5.25V in accordance with its applicable specification.Device specifications require that the minimum supply voltage is 4.75V.A logic IC based on BUS DRIVER is employed in this system.
QS32X245Q2G Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS32X245Q2G Applications
There are a lot of Integrated Device Technology (IDT) QS32X245Q2G Signal Switches / Multiplexers / Decoders applications.
- Injectors
- Steel plants
- Telephone network
- Automatic health monitoring systems
- Metal detectors
- Microprocessor instruction decoding
- Home automation system
- Computer memory
- Speed synchronization of multiple motors in industries
- Signal router
