QS32X245Q2G8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Number of Pins | 40 |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 920mW |
| Number of Ports | 2 |
| Nominal Supply Current | 6μA |
| Number of Bits | 16 |
| Propagation Delay | 250 ps |
| Quiescent Current | 6μA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Length | 9.9mm |
| Width | 3.81mm |
| Thickness | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS32X245Q2G8 Overview
There is a design for terminating 40 as part of its basic configuration.In multiplexer's system, 5V is the voltage supplied.A component pin count of 40 can be found on this turn signal switch.As a result, conductors end at GULL WING.There are 40 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 16 bits.A power supply is provided for mux switch's normal operation of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.Not being affected by the external factors, consumes 6μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.With a resistance of 15Ohm, it operates.There is no problem with operating this signal switch at the maximum temperature of 85°C.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.25V.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4.75V.Configuration elements for the mux switch consist of 2.For its logic, IC BUS DRIVER is used.
QS32X245Q2G8 Features
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS32X245Q2G8 Applications
There are a lot of Integrated Device Technology (IDT) QS32X245Q2G8 Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- Injectors
- Communication system
- Recording transmission
- Medium scale TV wall
- Implementing boolean functions with multiple variables
- Enabling different rows of memory depending on address in memory chips
- Speed synchronization of multiple motors in industries
- CPU memory location identification
- Make half adder
