QS32X861Q1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 48 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 6μA |
| Number of Bits | 20 |
| Propagation Delay | 250 ps |
| Quiescent Current | 6μA |
| Turn On Delay Time | 6.5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 2 |
| Length | 9.9mm |
| Width | 3.8mm |
| Thickness | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS32X861Q1G Overview
In order to save board space, digital switch is located in the QSOP.There are 48 terminations included in its basic configuration.The multiplexer's system works with 5V voltage.This turn signal switch contains 48 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.With 48 pins, it is configured.It is mounted in the way of Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.As a result, signal multiplexer provides a total of 20 bits.Normally, 5V is powered by a battery.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Without any external influences, it consumes 6μA current of multiplexer ic at all times.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The system operates with a resistance of 2.This signal switching operates at a resistance of 15Ohm.At 85°C, the maximum operating temperature of this signal switch is acceptable.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.According to the applicable device specification, the signal switches operates at a maximum supply voltage of 5.25V.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 4.75V.In terms of logic ICs, it uses BUS DRIVER.
QS32X861Q1G Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS32X861Q1G Applications
There are a lot of Integrated Device Technology (IDT) QS32X861Q1G Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- Medium scale TV wall
- Audio transmission
- Idle motor
- Home automation system
- Electronically controlled engine system
- To select different task for memory in microprocessor memory systems
- HD surveillance system
- Logic circuits
- Make half adder
