Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
8 |
Published |
2009 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
15Ohm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Power Dissipation-Max |
500mW |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Number of Bits |
1 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
6.5 ns |
Family |
3306 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-120mA |
Low Level Output Current |
120mA |
Length |
4.9mm |
Width |
3.9mm |
Thickness |
1.5mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
QS3306AS1G Overview
As a means of saving space, digital switch is provided in the SOIC.There are 8 terminations included in its basic configuration.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 8 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, the supply type is Single.This multiplexer ic is configured with 8 pins.The mounting is in the way of Surface Mount.The logic switch is included into the family of 3306.There are 1 bits signal multiplexer provides.A power supply is provided for mux switch's normal operation of 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.With a resistance of 0, it operates.The system operates with a resistance of 15Ohm.A maximum temperature of 85°C is acceptable for this signal switch.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.The signal switches is specified to operate at the maximum supply voltage of 5.25V in compliance with the applicable device specification.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 4.75V.Configuration elements for the mux switch consist of 2.It employs BUS DRIVER as its logic IC.
QS3306AS1G Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3306AS1G Applications
There are a lot of Integrated Device Technology (IDT) QS3306AS1G Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- To select different devices in microprocessor input
- Implementing boolean functions with multiple variables
- Electronically controlled engine system
- D/A converters
- Automatic Monitoring systems
- Seven segment displays
- Enabling different rows of memory depending on address in memory chips
- Data transfer
- Enabling different functions units in microprocessor instruction decoding