Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
8 |
Published |
2005 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
15Ohm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Power Dissipation-Max |
500mW |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Number of Bits |
1 |
Propagation Delay |
6.5 ns |
Quiescent Current |
3μA |
Turn On Delay Time |
6.5 ns |
Family |
3306 |
Supply Type |
Single |
Turn-Off Delay Time |
5.5 ns |
Output Polarity |
TRUE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
-120mA |
Low Level Output Current |
120mA |
Length |
4.9mm |
Width |
3.9mm |
Thickness |
1.5mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
QS3306AS1G8 Overview
Providing this information in the SOIC enables digital switch board space to be saved.The basic configuration of this system includes 8 terminations.The voltage supplied for multiplexer's system is 5V.multiplexer's systemIn this turn signal switch, there are 8 components that can be connected to each pin.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.Currently, it is configured with a 8 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.The 3306 family includes the logic switch.There are 1 bits in signal multiplexer.During mux switch's normal operation, 5V is provided with a power supply.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.A resistance of 15Ohm is used to operate the signal switching.In this case, operating this signal switch at 85°C is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.25V.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 4.75V.The mux switch configuration contains 2 elements.The logic IC of the digitalswitch is BUS DRIVER.
QS3306AS1G8 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3306AS1G8 Applications
There are a lot of Integrated Device Technology (IDT) QS3306AS1G8 Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- Home automation system
- D/A converters
- Speed synchronization of multiple motors in industries
- Night vision cameras
- Data-routing applications
- Decimal decoder
- To select different task for memory in microprocessor memory systems
- Relay
- Electronic circuits