QS3383QG
| Parameters | |
|---|---|
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 4 |
| Nominal Supply Current | 1.5mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 6.5 ns |
| Family | 3383 |
| Number of Inputs | 10 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
QS3383QG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the QSOP.Among its basic configurations are 24 terminations.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch consists of 24 component pins.It employs GULL WING as the point at which conductors come to an end.This supply type employs Single.A configuration of 24 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of 3383 members.In this signal multiplexer, there are 10 bits that are provided.There is a power supply provided for the mux switch's normal operation of 5V.The digital switch ic is a part of an electronic system classified as Other Logic ICs.Not being affected by the external factors, consumes 1.5mA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.This multiplexer has 10 inputs.The signal switching operates with a resistance of 4.This signal switching operates at a resistance of 15Ohm.85°C is an acceptable maximum temperature for this signal switch.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Device specifications specify 5.25V as the maximum supply voltage for the signal switches.A minimum supply voltage of 4.75V is specified for the digital swith by its applicable specification.In addition, it provides improved features of TTL COMPATIBLE BUS SWITCH.BUS EXCHANGER is the logic integrated circuit used in the digitalswitch.
QS3383QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS EXCHANGER as the logic IC
QS3383QG Applications
There are a lot of Integrated Device Technology (IDT) QS3383QG Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Encrypted communications system
- Frequency multiplexing system
- Automatic health monitoring systems
- Logic gates for other digital devices
- Solenoid cooling fan
- Computer memory
- CPU memory location identification
- Image transmission
- War field flying robot with a night vision flying camera
