QS3383QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 4 |
| Nominal Supply Current | 1.5mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 6.5 ns |
| Family | 3383 |
| Number of Inputs | 10 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3383QG8 Overview
As a means of saving space, digital switch is provided in the QSOP.There are 24 terminations included in its basic configuration.The multiplexer's system is supplied with a voltage of 5V.Signal switch has 24 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.It is configured with 24 pins.As you can see, it is mounted in the direction of Surface Mount.There is a family of 3383 members.As a result, signal multiplexer provides 10 bits.A power supply is provided for mux switch's normal operation of 5V.This is a signal switch that is categorized as Other Logic ICs.No external influence consumes 1.5mA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 10 inputs.A resistance of 4 is used to operate the signal switching.A resistance of 15Ohm is used to operate the signal switching.A maximum temperature of 85°C is acceptable for this signal switch.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.Device specifications specify 5.25V as the maximum supply voltage for the signal switches.Typical device specifications specify a voltage supply of 4.75V for the digital swith.In addition, it provides improved characteristics compared to TTL COMPATIBLE BUS SWITCH.It uses the logic IC BUS EXCHANGER as its core logic unit.
QS3383QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS EXCHANGER as the logic IC
QS3383QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3383QG8 Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- High-performance memory-decoding applications
- Automatic health monitoring systems
- HDMI applications
- War field flying robot with a night vision flying camera
- Transmission from the computer system of a satellite
- Make half adder
- Data transfer
- Seven segment displays
- Analog to digital conversion
