banner_page

QS3384PAG8

24 Terminations24 Pin Signal switch1 FunctionsMin 4.75V VMax 5.25V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-QS3384PAG8
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 299
  • Description: 24 Terminations24 Pin Signal switch1 FunctionsMin 4.75V VMax 5.25V V(Kg)

Details

Tags

Parameters
Package / Case TSSOP
Number of Pins 24
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 24
ECCN Code EAR99
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 24
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Number of Ports 2
Number of Bits 10
Propagation Delay 6.5 ns
Quiescent Current 1.5mA
Family 3384
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -120mA
Low Level Output Current 120mA
Independent Circuits 2
Length 7.8mm
Width 4.4mm
Thickness 1mm
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount

QS3384PAG8 Overview


As a means of saving space, digital switch is provided in the TSSOP.The basic configuration includes 24 terminations.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 24 is found on this turn signal switch.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.Currently, it is configured with 24 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the 3384 family.In the signal multiplexer, there are 10 bits available.It is provided that 5V has a power supply in order to function normally.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The system operates with a resistance of 2.The maximum operating temperature of 85°C is acceptable for this signal switch.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.25V.A minimum supply voltage of 4.75V is required to operate the digital swith.IC BUS DRIVER is used for the logic of this chip.

QS3384PAG8 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC

QS3384PAG8 Applications


There are a lot of Integrated Device Technology (IDT) QS3384PAG8 Signal Switches / Multiplexers / Decoders applications.

  • LVDS
  • Steel plants
  • Used to connect a single source to multiple destinations
  • Code conversion
  • Recording transmission
  • Electronics industry
  • Data distribution
  • Automatic health monitoring systems
  • D/A converters
  • Frequency multiplexing system

Write a review

Note: HTML is not translated!
    Bad           Good