QS3384QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 6.5 ns |
| Family | 3384 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 2 |
| Height Seated (Max) | 1.75mm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3384QG Overview
Digital switch is provided in the QSOP for the purpose of saving board space.Among its basic features are 24 terminations.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 24 can be found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In this case, Single is employed as the supply type.A configuration of 24 pins is used.The mounting is in the way of Surface Mount.Among the family of 3384 the logic switch is a member.As a result, signal multiplexer provides 10 bits.Normally, 5V is powered by a battery.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.No external influence consumes 1.5mA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 15Ohm.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.The device is specified to operate at a maximum supply voltage of 5.25V in accordance with the applicable device specification.Device specifications require that the minimum supply voltage is 4.75V.In addition, it provides improved characteristics compared to TTL COMPATIBLE BUS SWITCH.IC BUS DRIVER is used for the logic of this chip.
QS3384QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
QS3384QG Applications
There are a lot of Integrated Device Technology (IDT) QS3384QG Signal Switches / Multiplexers / Decoders applications.
- Paper plants
- Enabling different functions units in microprocessor instruction decoding
- Communication system
- Computer memory
- Code conversion
- LVDS
- Electronic circuits
- Small scale TV wall
- Idle motor
- VGA
