banner_page

QS3384QG8

24 Terminations24 Pin Signal switch1 FunctionsMin 4.75V VMax 5.25V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-QS3384QG8
  • Package: QSOP
  • Datasheet: PDF
  • Stock: 822
  • Description: 24 Terminations24 Pin Signal switch1 FunctionsMin 4.75V VMax 5.25V V(Kg)

Details

Tags

Parameters
Power Dissipation-Max 500mW
Number of Ports 2
Nominal Supply Current 2.5mA
Number of Bits 10
Propagation Delay 6.5 ns
Quiescent Current 1.5mA
Turn On Delay Time 6.5 ns
Family 3384
Output Characteristics 3-STATE
Supply Type Single
Turn-Off Delay Time 5.5 ns
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -120mA
Low Level Output Current 120mA
Independent Circuits 2
Height Seated (Max) 1.75mm
Length 8.7mm
Width 3.8mm
Thickness 1.47mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case QSOP
Number of Pins 24
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 24
ECCN Code EAR99
Resistance 15Ohm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Pin Count 24
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V

QS3384QG8 Overview


Digital switch is provided in the QSOP for the purpose of saving board space.Among its basic features are 24 terminations.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 24 components that can be connected to each pin.As a result, conductors end at GULL WING.As a type of supply, Single is employed.The board is configured with 24 pins.Multiplexer ics are mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the 3384 family.In the signal multiplexer, there are 10 bits available.For mux switch's normal operation, power supply 5V is provided.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The resistance of the signal switching is 2.With a resistance of 15Ohm, it operates.Signal switch operation at 85°C temperature is acceptable.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 5.25V.Device specifications require that the minimum supply voltage is 4.75V.It employs BUS DRIVER as its logic IC.

QS3384QG8 Features


Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC

QS3384QG8 Applications


There are a lot of Integrated Device Technology (IDT) QS3384QG8 Signal Switches / Multiplexers / Decoders applications.

  • Night vision cameras
  • To select different devices in microprocessor input
  • Speed control of medern motors
  • CPU memory location identification
  • Communication system
  • Decimal decoder
  • Data communication
  • Microprocessor memory systems
  • Data demultiplexing
  • RF-based home automation system

Write a review

Note: HTML is not translated!
    Bad           Good