QS3390QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 28 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 500mW |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Family | 3390 |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Number of Input Lines | 16 |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Length | 9.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3390QG8 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the QSOP.In this case, it is packaged as Tape & Reel.As part of its basic configuration, 28 terminations are designed as a part of it.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 28 component pins.It employs GULL WING as the point at which conductors come to an end.This supply type employs Single.The board has 28 pins configured.The mounting point is Surface Mount.The logic switch is a member of the 3390 family.A power supply is provided for mux switch's normal operation of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.No external influence consumes 3μA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.A voltage level can be inserted into the 16 input lines of multiplexers.Signal sources consist of output lines of 8.The maximum temperature for this signal switch is 85°C.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.It is specified that the signal switches should operate at 5.25V as its maximum supply voltage.Typical device specifications specify a voltage supply of 4.75V for the digital swith.
QS3390QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
16 input lines
8 output lines
QS3390QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3390QG8 Signal Switches / Multiplexers / Decoders applications.
- Medical industry
- A/D converters
- Data-routing applications
- D/A converters
- Image transmission
- VGA
- LVDS
- Communication system
- HD surveillance system
- Code conversion
