Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
QSOP |
Number of Pins |
48 |
Published |
2009 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
ECCN Code |
EAR99 |
Resistance |
15Ohm |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Multiplexer/Demultiplexers |
Peak Reflow Temperature (Cel) |
260 |
Pin Count |
48 |
Number of Outputs |
12 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of Circuits |
3 |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Power Dissipation |
500mW |
Number of Bits |
24 |
Propagation Delay |
5.2 ns |
Turn On Delay Time |
5.2 ns |
Logic Function |
Demultiplexer, Multiplexer |
Low Level Output Current |
120mA |
Length |
9.9mm |
Width |
3.8mm |
Thickness |
1.6mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
QS33X257Q1G Overview
The electronic part can be shipped overseas conveniently because it is packaged in QSOP. As part of the design of the 48 series, this electronic part has been incorporated into the system. A 3 circuit is present in this switch device. In this multiplexer, the internal resistance is 15Ohm. Please refer to the datasheets for 48 pins functions. There is Multiplexer/Demultiplexers analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.25V to the switch device in normal circumstances. The lowest voltage the electronic part should receive is 4.75V. It can operate from 5V operating voltages. A temperature above 85°C is not suitable for operation of the analogue multiplexer. An output of 12 is provided by the digital multiplexer. 24-bit conductivity is possible.
QS33X257Q1G Features
24-Bit
QS33X257Q1G Applications
There are a lot of Integrated Device Technology (IDT) QS33X257Q1G Analog Switches & Multiplexers ICs applications.
- Routers
- Cross Connects
- Cell phones
- Battery Powered Instruments
- High reliability control systems
- Signal routing between systems
- Remote Powered Equipment
- Access Concentrators
- SDH/SONET multiplexers
- New designs requiring multiplexer functions