QS34X2245Q3G
| Parameters | |
|---|---|
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 4 |
| Height Seated (Max) | 2mm |
| Length | 20.5mm |
| Width | 3.81mm |
| Thickness | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Resistance | 40Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 1.4W |
| Number of Ports | 2 |
| Nominal Supply Current | 12μA |
| Number of Bits | 32 |
| Propagation Delay | 1.25 ns |
| Quiescent Current | 12μA |
| Turn On Delay Time | 6.6 ns |
QS34X2245Q3G Overview
There are 80 terminations included in its basic configuration.The multiplexer is supplied with 5V voltage.In this turn signal switch, there are 80 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply of Single.A total of 80 pins are configured on this board.It is positioned in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.In this signal multiplexer, there are 32 bits that are provided.The power supply of 5V is provided for mux switch's normal operation.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 12μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.40Ohm is the resistance at which it operates.Signal switch operation at 85°C temperature is acceptable.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.25V.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4.75V.It uses IC BUS DRIVER for its logic.
QS34X2245Q3G Features
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS34X2245Q3G Applications
There are a lot of Integrated Device Technology (IDT) QS34X2245Q3G Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- Computer memory
- Data communication
- Code converters
- Data collection system
- A/D converters
- Microprocessor input/output systems
- Speed synchronization of multiple motors in industries
- HDMI applications
- Encrypted communications system
