QS34X2245Q3G8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 80 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Number of Bits | 32 |
| Propagation Delay | 6.6 ns |
| Quiescent Current | 12μA |
| Turn On Delay Time | 6.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.7526mm |
| Length | 20.5mm |
| Width | 3.81mm |
| Thickness | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS34X2245Q3G8 Overview
There are 80 terminations included in its basic configuration.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 80 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.With 80 pins, it is configured.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 32 bits that are provided.For mux switch's normal operation, there is a power supply provided at 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 12μA current.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The system operates with a resistance of 2.In this case, operating this signal switch at 85°C is acceptable.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.25V.Device specifications require that the digital swith operate at a minimum supply voltage of 4.75V.For its logic, IC BUS DRIVER is used.
QS34X2245Q3G8 Features
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS34X2245Q3G8 Applications
There are a lot of Integrated Device Technology (IDT) QS34X2245Q3G8 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Analog, digital or video signal switching
- Microprocessor input/output systems
- Control unit of Central Processing unit (CPU)
- Electronics industry
- VGA
- Microprocessor instruction decoding
- Enabling different rows of memory depending on address in memory chips
- Video transmission
- Arithmetic Logic Units
