QS34X245Q3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Number of Pins | 80 |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 1.4W |
| Number of Ports | 2 |
| Nominal Supply Current | 12μA |
| Number of Bits | 32 |
| Propagation Delay | 250 ps |
| Quiescent Current | 12μA |
| Turn On Delay Time | 5.6 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.7526mm |
| Length | 20.5mm |
| Width | 3.81mm |
| Thickness | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS34X245Q3G Overview
Among its basic configurations are 80 terminations.The multiplexer's system works with 5V voltage.This turn signal switch contains 80 component pins.Conductors terminate at GULL WING in this design.In this case, Single is employed as the supply type.Currently, it is configured with a 80 pin configuration.It is mounted in the way of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.There are 32 bits in signal multiplexer.In order to maintain mux switch's normal operation, power is provided to 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.Without external influences, it consumes 12μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.As far as the resistance is concerned, it operates with 2.With a resistance of 15Ohm, it operates.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 5.25V.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4.75V.For its logic, IC BUS DRIVER is used.
QS34X245Q3G Features
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS34X245Q3G Applications
There are a lot of Integrated Device Technology (IDT) QS34X245Q3G Signal Switches / Multiplexers / Decoders applications.
- Communication system
- Electronic circuits
- Signal router
- Enabling block of memory depending on address in memory chips
- D/A converters
- Encrypted communications system
- Microprocessor input/output systems
- Textile mills
- Data collection system
- Recording transmission
