QS34XVH245Q3G8
| Parameters | |
|---|---|
| Propagation Delay | 200 ps |
| Quiescent Current | 12mA |
| Turn On Delay Time | 8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 4 |
| Height Seated (Max) | 2mm |
| Length | 20.5mm |
| Width | 3.81mm |
| Thickness | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 80 |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Resistance | 9Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Frequency | 20MHz |
| Pin Count | 80 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 8mA |
| Number of Bits | 32 |
QS34XVH245Q3G8 Overview
The basic configuration includes 80 terminations.The multiplexer's system is powered by 2.5V voltage.This turn signal switch has 80 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply Single that is employed in this case.A total of 80 pins are configured on this board.The mounting point is Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 32 bits that are provided.In order to maintain mux switch's normal operation, power is provided to 3.3V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.No external influence consumes 12mA current of multiplexer ic.2 is the resistance at which it operates.The system operates with a resistance of 9Ohm.The signal switch can operate at a maximum temperature of 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is specified for the digital swith in accordance with its applicable specifications.BUS DRIVER is the logic integrated circuit used in the digitalswitch.
QS34XVH245Q3G8 Features
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS34XVH245Q3G8 Applications
There are a lot of Integrated Device Technology (IDT) QS34XVH245Q3G8 Signal Switches / Multiplexers / Decoders applications.
- LVDS
- PCIe
- War field flying robot with a night vision flying camera
- Control unit of Central Processing unit (CPU)
- Microprocessor instruction decoding
- Code conversion
- D/A converters
- Logic gates for other digital devices
- To select different devices in microprocessor output
- Data distribution
