QS3861PAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 200nA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3861PAG Overview
It is included in the TSSOP in order to save board space.As parts of its basic configuration, 24 terminations are desgined.In multiplexer's system, 5V is the voltage supplied.A component pin count of 24 is found on this turn signal switch.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.It is configured with 24 pins.As you can see, it is mounted in the direction of Surface Mount.As a result, signal multiplexer provides a total of 10 bits.The power supply of 5V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.This signal switching operates at a resistance of 15Ohm.The maximum temperature for this signal switch is 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.The relevant device specification specifies a maximum supply voltage of 5.25V for the signal switches.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4.75V.It also provides improved characteristics of TTL COMPATIBLE BUS SWITCH.It uses the logic IC BUS DRIVER as its core logic unit.
QS3861PAG Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
QS3861PAG Applications
There are a lot of Integrated Device Technology (IDT) QS3861PAG Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Combinational circuit
- Time division multiplexing system
- Data-routing applications
- Automatic health monitoring systems
- Encrypted communications system
- Electronically controlled engine system
- Audio transmission
- A robotic vehicle with the metal detector
- Night vision cameras
