QS3861PAG8
| Parameters | |
|---|---|
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TTL COMPATIBLE BUS SWITCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Nominal Supply Current | 200nA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
QS3861PAG8 Overview
Due to the fact that it is provided in the TSSOP, digital switch allows the board to be compacted.There are 24 terminations included in its basic configuration.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 24 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.A configuration of 24 pins is used.The mounting is in the way of Surface Mount.As a result, signal multiplexer provides 10 bits.It is provided that 5V has a power supply in order to function normally.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Without any external influences, it consumes 3μA current of multiplexer ic at all times.Supply voltages of 5V can provide reliable performance of the multiplexers.The system operates with a resistance of 2.The system operates with a resistance of 15Ohm.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.The signal switches is specified to operate at the maximum supply voltage of 5.25V in compliance with the applicable device specification.Device specifications require that the digital swith operate at a minimum supply voltage of 4.75V.Additionally, TTL COMPATIBLE BUS SWITCH provides improved characteristics.As its logic IC, it uses BUS DRIVER.
QS3861PAG8 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC
QS3861PAG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3861PAG8 Signal Switches / Multiplexers / Decoders applications.
- Relay
- Control unit of Central Processing unit (CPU)
- Small scale TV wall
- Encrypted communications system
- Medium scale TV wall
- Speed control of medern motors
- Recording transmission
- Memory system of computers
- Robotic vehicles
- A robotic vehicle with the metal detector
