banner_page

QS3861QG

24 Terminations24 Pin Signal switch1 FunctionsMin 4.75V VMax 5.25V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-QS3861QG
  • Package: QSOP
  • Datasheet: PDF
  • Stock: 124
  • Description: 24 Terminations24 Pin Signal switch1 FunctionsMin 4.75V VMax 5.25V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Package / Case QSOP
Number of Pins 24
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 24
ECCN Code EAR99
Resistance 15Ohm
Terminal Finish Matte Tin (Sn) - annealed
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature TTL COMPATIBLE BUS SWITCH
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Pin Count 24
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Power Dissipation-Max 500mW
Number of Ports 2
Nominal Supply Current 200nA
Number of Bits 10
Propagation Delay 250 ps
Quiescent Current 3μA
Turn On Delay Time 6.5 ns
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -120mA
Low Level Output Current 120mA
Independent Circuits 1
Length 8.7mm
Width 3.8mm
Thickness 1.47mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

QS3861QG Overview


Digital switch is provided in the QSOP for the purpose of saving board space.As part of its basic configuration, 24 terminations are designed as a part of it.The turn signal switch is supplied with a voltage of 5V volts.Signal switch has 24 component pins.It is the end of conductors that is represented by GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic has 24 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.In this signal multiplexer, there are 10 bits provided.The power supply of 5V is provided for mux switch's normal operation.The part belongs to the Bus Driver/Transceivers category of signal switches.It consumes 3μA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This signal switching operates at a resistance of 2.A resistance of 15Ohm is used to operate it.At 85°C, the maximum operating temperature of this signal switch is acceptable.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.The device is specified to operate at a maximum supply voltage of 5.25V in accordance with the applicable device specification.A minimum supply voltage of 4.75V is specified for the digital swith by its applicable specification.Additionally, TTL COMPATIBLE BUS SWITCH has improved characteristics.BUS DRIVER is the logic integrated circuit used in the digitalswitch.

QS3861QG Features


Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC

QS3861QG Applications


There are a lot of Integrated Device Technology (IDT) QS3861QG Signal Switches / Multiplexers / Decoders applications.

  • Night vision cameras
  • Used to connect a single source to multiple destinations
  • To select different task for memory in microprocessor memory systems
  • Data communication
  • Data transfer
  • Data collection system
  • D/A converters
  • HDMI applications
  • Microprocessor instruction decoding
  • Video transmission

Write a review

Note: HTML is not translated!
    Bad           Good