QS3861QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Weight | 255.5993mg |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 500mW |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Height | 1.47mm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3861QG8 Overview
Providing this information in the QSOP enables digital switch board space to be saved.This configuration includes 24 terminations as part of its basic functionality.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThere are 24 component pins in this turn signal switch.A conductor terminates at GULL WING.There is a supply type of Single employed as part of this supply.A configuration of 24 pins is used.As you can see, it is mounted in the direction of Surface Mount.As a result, signal multiplexer provides 10 bits.For mux switch's normal operation, power supply 5V is provided.This is an the digital switch ic that is classified as Bus Driver/Transceivers.No external influence consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.This signal switching operates at a resistance of 2.As far as the resistance is concerned, it operates with 15Ohm.A maximum temperature of 85°C is acceptable for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.The signal switches is specified to operate at the maximum supply voltage of 5.25V in compliance with the applicable device specification.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 4.75V.It uses the logic IC BUS DRIVER as its core logic unit.
QS3861QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
QS3861QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3861QG8 Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- Electronic circuits
- GLAN
- Relay
- Seven segment displays
- Image transmission
- Metal detectors
- Control unit of Central Processing unit (CPU)
- Frequency multiplexing system
- RF-based home automation system
