QS3VH125QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 9Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 4 |
| Propagation Delay | 200 ps |
| Quiescent Current | 3mA |
| Turn On Delay Time | 8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH125QG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the QSOP.Among its basic features are 16 terminations.The multiplexer's system is powered by 2.5V volts.This turn signal switch contains 16 component pins.As a result, conductors end at GULL WING.There is a type of supply Single that is employed in this case.The board has 16 pins configured.The mounting point is Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.As a result, signal multiplexer provides a total of 4 bits.The power supply of 3.3V is provided for mux switch's normal operation.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 3mA current of multiplexer ic.The resistance is 2.This signal switching operates at a resistance of 9Ohm.There is no problem with operating this signal switch at the maximum temperature of 85°C.The minimal operating temperature of the multiplexer should be maintained at -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 3.6V.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 2.3V.For its logic, IC BUS DRIVER is used.
QS3VH125QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS3VH125QG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH125QG Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Medium scale TV wall
- Video transmission
- Seven segment displays
- Data demultiplexing
- Relay
- Data communication
- Control unit of Central Processing unit (CPU)
- Used to connect a single source to multiple destinations
- A robotic vehicle with the metal detector
