QS3VH126QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 9Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 4 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH126QG Overview
Providing this information in the QSOP enables digital switch board space to be saved.As part of its basic configuration, 16 terminations are designed as a part of it.In multiplexer's system, 2.5V is the voltage supplied.This turn signal switch consists of 16 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.There are 16 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.In the signal multiplexer, there are 4 bits available.There is a power supply provided for the mux switch's normal operation of 3.3V.The part belongs to the Bus Driver/Transceivers category of signal switches.It consumes 4mA current of multiplexer ic since it is not affected by external factors.The system operates with a resistance of 2.9Ohm is the resistance at which it operates.The maximum operating temperature of 85°C is acceptable for this signal switch.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.Device specifications require that the minimum supply voltage is 2.3V.The logic IC of the digitalswitch is BUS DRIVER.
QS3VH126QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS3VH126QG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH126QG Signal Switches / Multiplexers / Decoders applications.
- HD surveillance system
- Make half adder
- Night vision cameras
- VGA
- Data bus control
- Relay
- Enabling different rows of memory depending on address in memory chips
- Robotic vehicles
- Code conversion
- Automation system
