QS3VH126QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 9Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 4 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH126QG8 Overview
Digital switch is provided in the QSOP for the purpose of saving board space.It is designed with 16 terminations as part of its basic configuration.The turn signal switch is supplied with a voltage of 2.5V volts.A component pin count of 16 can be found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.There is a type of supply Single that is employed in this case.There are 16 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of CB3Q/3VH/3C/2B.There are 4 bits in signal multiplexer.During mux switch's normal operation, 3.3V is provided with a power supply.The part belongs to the Bus Driver/Transceivers category of signal switches.It consumes 4mA current of multiplexer ic without external influences.A resistance of 2 governs its operation.The system operates with a resistance of 9Ohm.The signal switch can operate at a maximum temperature of 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 2.3V.For its logic, IC BUS DRIVER is used.
QS3VH126QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS3VH126QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3VH126QG8 Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Injectors
- Microprocessor input/output systems
- Medium scale TV wall
- Electronic circuits
- Speed synchronization of multiple motors in industries
- Automation system
- Arithmetic Logic Units
- RF-based home automation system
- Control unit of Central Processing unit (CPU)
