QS3VH126S1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 9Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 4 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 8.6mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH126S1G Overview
Digital switch is provided in the SOIC for the purpose of saving board space.As part of its basic configuration, 14 terminations are designed as a part of it.For multiplexer's system, a voltage of 2.5V is supplied.A component pin count of 14 can be found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a supply type of Single employed as part of this supply.There are 14 pins on it.Surface Mount is the way it is mounted.The logic switch is a member of the CB3Q/3VH/3C/2B family.As a result, signal multiplexer provides a total of 4 bits.There is a power supply provided for the mux switch's normal operation of 3.3V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 4mA current.This signal switching operates at a resistance of 2.The system operates with a resistance of 9Ohm.At 85°C, the maximum operating temperature of this signal switch is acceptable.The minimal operating temperature of the multiplexer should be maintained at -40°C.Based on the device specifications, the signal switches is designed to operate at 3.6V maximum supply voltage.According to its specifications, the digital swith requires a minimum supply voltage of 2.3V.IC BUS DRIVER is used for the logic of this chip.
QS3VH126S1G Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS3VH126S1G Applications
There are a lot of Integrated Device Technology (IDT) QS3VH126S1G Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- Textile mills
- War field flying robot with a night vision flying camera
- Enabling block of memory depending on address in memory chips
- A/D converters
- Home automation system
- LVDS
- Electronic circuits
- Idle motor
- Make half adder
