QS3VH16211PAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Resistance | 8Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 3mA |
| Number of Bits | 24 |
| Propagation Delay | 200 ps |
| Quiescent Current | 3mA |
| Turn On Delay Time | 9 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Turn-Off Delay Time | 8.5 ns |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -120mA |
| Low Level Output Current | 120mA |
| Independent Circuits | 2 |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH16211PAG Overview
It is included in the TSSOP in order to save board space.It is designed with 56 terminations as part of its basic configuration.The multiplexer's system works with 2.5V voltage.In this turn signal switch, there are 56 component pins.Conductors terminate at GULL WING in this design.In this case, Single is employed as the supply type.This multiplexer ic has 56 pins configured.The mount is in Surface Mount.In this signal multiplexer, there are 24 bits that are provided.The part belongs to the Bus Driver/Transceivers category of signal switches.Without the influence of external factors, it consumes 3mA current of multiplexer ic.2 is the resistance at which it operates.This signal switching operates at a resistance of 8Ohm.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.The device is specified to operate at the maximum supply voltage of 3.6V in accordance with its applicable specification.Typical device specifications specify a voltage supply of 2.3V for the digital swith.In order to implement its logic, it makes use of IC BUS DRIVER.
QS3VH16211PAG Features
Supplied in the TSSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
QS3VH16211PAG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH16211PAG Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Logic circuits
- Image transmission
- Code converters
- Paper plants
- Enabling different rows of memory depending on address in memory chips
- RF-based home automation system
- A/D converters
- Telephone network
- Automation system
