QS3VH2245PAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 40Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 8 |
| Propagation Delay | 1.35 ns |
| Quiescent Current | 4mA |
| Turn On Delay Time | 9 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH2245PAG Overview
It is included in the TSSOP in order to save board space.There are 20 terminations included in its basic configuration.The voltage supplied for multiplexer's system is 3.3V.multiplexer's systemSignal switch has 20 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Single employed as part of this supply.The board has 20 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.In the CB3Q/3VH/3C/2B family, the logic switch is included.In this signal multiplexer, there are 8 bits that are provided.During mux switch's normal operation, 3.3V is provided with a power supply.Bus Driver/Transceivers is a category for the digital switch ics.Despite not interacting with external factors, it consumes 4mA current of multiplexer ic.A resistance of 2 governs its operation.With a resistance of 40Ohm, it operates.In this case, operating this signal switch at 85°C is acceptable.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.It is specified that the signal switches should operate at 3.6V as its maximum supply voltage.A minimum supply voltage of 2.3V is required to operate the digital swith.It employs BUS DRIVER as its logic IC.
QS3VH2245PAG Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS3VH2245PAG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH2245PAG Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- Image transmission
- Seven segment displays
- Injectors
- Data demultiplexing
- Encrypted communications system
- Automatic health monitoring systems
- To select different devices in microprocessor output
- CPU memory location identification
- Decimal decoder
