QS3VH2245QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9 ns |
| Quiescent Current | 4mA |
| Family | CB3Q/3VH/3C/2B |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH2245QG8 Overview
Digital switch is provided in the QSOP for the purpose of saving board space.Among its basic features are 20 terminations.For multiplexer's system, 3.3V voltage is supplied.A component pin count of 20 is found on this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.This multiplexer ic is configured with 20 pins.This unit is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the CB3Q/3VH/3C/2B family.In this signal multiplexer, there are 8 bits provided.The power supply of 3.3V is provided for mux switch's normal operation.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.No external influence consumes 4mA current of multiplexer ic.This signal switching operates at a resistance of 2.Signal switch operation at 85°C temperature is acceptable.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.It is specified that the signal switches should operate at 3.6V as its maximum supply voltage.According to its specifications, the digital swith requires a minimum supply voltage of 2.3V.The logic IC of the digitalswitch is BUS DRIVER.
QS3VH2245QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS3VH2245QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3VH2245QG8 Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Video transmission
- Robotic vehicles
- Night vision cameras
- Encrypted communications system
- Recording transmission
- PCIe
- Code converters
- Textile mills
- HDMI applications
