QS3VH244QG
| Parameters | |
|---|---|
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Quiescent Current | 4mA |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 2 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
QS3VH244QG Overview
In order to conserve board space, digital switch is included in the QSOP.Its basic configuration includes terminations in the 20 range.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch consists of 20 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.There are 20 pins on it.As you can see, it is mounted in the direction of Surface Mount.In the signal multiplexer, there are 8 bits available.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.No external influence consumes 4mA current of multiplexer ic.This signal switching operates at a resistance of 2.At 85°C, the maximum operating temperature of this signal switch is acceptable.The minimal operating temperature of the multiplexer should be maintained at -40°C.Device specifications specify 3.6V as the maximum supply voltage for the signal switches.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2.3V.It employs BUS DRIVER as its logic IC.
QS3VH244QG Features
Supplied in the QSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
QS3VH244QG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH244QG Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- To select different devices in microprocessor output
- Frequency multiplexing system
- Combinational circuit
- PCIe
- GLAN
- Paper plants
- Microprocessor memory systems
- Analog to digital conversion
- To select different devices in microprocessor input
