QS3VH245PAG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 9Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Pin Count | 20 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 8 ns |
| Family | CB3Q/3VH/3C/2B |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH245PAG8 Overview
Due to the fact that it is provided in the TSSOP, digital switch allows the board to be compacted.It is designed with 20 terminations as part of its basic configuration.The multiplexer's system is powered by 2.5V volts.This turn signal switch has a total of 20 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.Currently, it is configured with a 20 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.The CB3Q/3VH/3C/2B family includes the logic switch.Signal multiplexer consists of 8 bits.The power supply of 3.3V is provided for mux switch's normal operation.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 4mA current.2 ports are used for some other peripheral signal switchings to plug in.A resistance of 9Ohm is used to operate the signal switching.The maximum operating temperature of 85°C is acceptable for this signal switch.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 3.6V.The digital swith is specified to operate at the minimum supply voltage of 2.3V in compliance with the applicable device specification.The logic IC of the digitalswitch is BUS DRIVER.
QS3VH245PAG8 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS3VH245PAG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3VH245PAG8 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Recording transmission
- Enabling different rows of memory depending on address in memory chips
- Data bus control
- HD surveillance system
- Enabling different functions units in microprocessor instruction decoding
- To select different devices in microprocessor input
- HDMI applications
- Metal detectors
- Home automation system
