QS3VH245QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 9Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 7 ns |
| Family | CB3Q/3VH/3C/2B |
| Supply Type | Single |
| Bandwidth | 500MHz |
| Turn-Off Delay Time | 6.5 ns |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH245QG8 Overview
Due to the lack of space on the board, digital switch is provided in the QSOP.There is a design for terminating 20 as part of its basic configuration.The multiplexer's system works with 2.5V voltage.There are 20 component pins in this turn signal switch.It employs GULL WING as the point at which conductors come to an end.As a type of supply, Single is employed.With 20 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of CB3Q/3VH/3C/2B.As a result, signal multiplexer provides a total of 8 bits.During mux switch's normal operation, 3.3V is provided with a power supply.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 4mA current of multiplexer ic.With a resistance of 0, it operates.It operates with a resistance of 9Ohm.The maximum temperature for this signal switch is 85°C.The minimal operating temperature of the multiplexer should be maintained at -40°C.The device is specified to operate at a maximum supply voltage of 3.6V in accordance with the applicable device specification.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2.3V.For its logic, IC BUS DRIVER is used.
QS3VH245QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 3.3V
BUS DRIVER as the logic IC
QS3VH245QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3VH245QG8 Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- CNC machines
- Image transmission
- Paper plants
- GLAN
- Memory system of computers
- Seven segment displays
- CPU memory location identification
- War field flying robot with a night vision flying camera
- Microprocessor memory systems
