QS3VH251QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Number of Elements | 1 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 9 ns |
| Family | CB3Q/3VH/3C/2B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| Prop. Delay@Nom-Sup | 0.2 ns |
| Low Level Output Current | 120mA |
| Number of Input Lines | 8 |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH251QG Overview
Due to the fact that it is provided in the QSOP, digital switch allows the board to be compacted.As parts of its basic configuration, 16 terminations are desgined.The multiplexer's system is powered by 2.5V voltage.There are 16 component pins in this turn signal switch.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of CB3Q/3VH/3C/2B.In the signal multiplexer, there are 8 bits available.In order to maintain mux switch's normal operation, power is provided to 2.5/3.3V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceiver.Without the influence of external factors, it consumes 4mA current of multiplexer ic.The resistance is 2.A voltage level can be inserted into the 8 input lines of multiplexers.85°C is an acceptable maximum temperature for this signal switch.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.Based on the device specifications, the signal switches is designed to operate at 3.6V maximum supply voltage.A minimum supply voltage of 2.3V is required to operate the digital swith.The configuration of the mux switch contains 1 elements.The logic IC of the digitalswitch is BUS EXCHANGER.
QS3VH251QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
8 input lines
BUS EXCHANGER as the logic IC
QS3VH251QG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH251QG Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- Enabling different functions units in microprocessor instruction decoding
- RF-based home automation system
- To select different devices in microprocessor input
- Robotic vehicles
- Seven segment displays
- Automatic health monitoring systems
- Solenoid cooling fan
- Analog to digital conversion
- To select different devices in microprocessor output
