QS3VH251QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9 ns |
| Quiescent Current | 4mA |
| Family | CB3Q/3VH/3C/2B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| Prop. Delay@Nom-Sup | 0.2 ns |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH251QG8 Overview
For the purpose of saving board space, digital switch is included in the QSOP.As part of its basic configuration, 16 terminations are designed as a part of it.The multiplexer's system is supplied with a voltage of 2.5V.This turn signal switch contains 16 component pins.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.The board is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CB3Q/3VH/3C/2B the logic switch is a member.Signal multiplexer provides 8 bits.A power supply is provided for mux switch's normal operation of 2.5/3.3V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceiver.Without any external influences, it consumes 4mA current of multiplexer ic at all times.Currently, the switches is packaged in accordance with the TAPE AND REEL method.A resistance of 2 governs its operation.The signal switch can operate at a maximum temperature of 85°C.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.Device specifications specify 3.6V as the maximum supply voltage for the signal switches.Device specifications require that the digital swith operate at a minimum supply voltage of 2.3V.A logic IC based on BUS EXCHANGER is employed in this system.
QS3VH251QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS EXCHANGER as the logic IC
QS3VH251QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3VH251QG8 Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Data distribution
- Electronics industry
- Frequency multiplexing system
- Microprocessor memory systems
- Encrypted communications system
- GLAN
- RF-based home automation system
- Decimal decoder
- D/A converters
