QS3VH253PAG
| Parameters | |
|---|---|
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 9 ns |
| Family | CB3Q/3VH/3C/2B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| Low Level Output Current | 120mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Pin Count | 16 |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
QS3VH253PAG Overview
Providing this information in the TSSOP enables digital switch board space to be saved.There is a design for terminating 16 as part of its basic configuration.The multiplexer's system is supplied with a voltage of 2.5V.A component pin count of 16 can be found on this turn signal switch.GULL WING represents the end of conductors.In this case, the supply type is Single.A total of 16 pins are configured on this board.It is mounted in the way of Surface Mount.The logic switch is included into the family of CB3Q/3VH/3C/2B.Signal multiplexer contains 8 bits.In order to maintain mux switch's normal operation, power is provided to 2.5/3.3V.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 4mA current of multiplexer ic.2 ports are used for some other peripheral signal switchings to plug in.To accept voltage levels, the multiplexers have4 input lines.A signal source is provided by 1 output lines.At 85°C, the maximum operating temperature of this signal switch is acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2.3V.It uses the logic IC BUS EXCHANGER as its core logic unit.
QS3VH253PAG Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
4 input lines
1 output lines
BUS EXCHANGER as the logic IC
QS3VH253PAG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH253PAG Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Communication system
- Electronically controlled engine system
- Encrypted communications system
- Enabling different rows of memory depending on address in memory chips
- Data-routing applications
- PCIe
- Data demultiplexing
- Memory system of computers
- Used to connect a single source to multiple destinations
