QS3VH253QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 9 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| Low Level Output Current | 120mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 1 |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH253QG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the QSOP.As parts of its basic configuration, 16 terminations are desgined.The multiplexer's system works with 2.5V voltage.Signal switch has 16 component pins.A conductor terminates at GULL WING.This supply type employs Single.This multiplexer ic is configured with 16 pins.It is mounted in the way of Surface Mount.The multiplexer ic provides 8 bits.There are 2 outputs designed for the operation of the turn signal switch.Other Logic ICs is the classification for this the digital switch ic.No external influence consumes 4mA current of multiplexer ic.A resistance of 2 is used to operate the signal switching.A voltage level can be inserted into the 4 input lines of multiplexers.A signal source has 1 output lines.There is no problem with operating this signal switch at the maximum temperature of 85°C.Ideally, the temperature of the multiplexer should not exceed -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.According to the applicable specification, the digital swith should operate at a minimum supply voltage of 2.3V.IC BUS EXCHANGER is used for the logic of this chip.
QS3VH253QG Features
Supplied in the QSOP package
Adopting a supply type of Single
4 input lines
1 output lines
BUS EXCHANGER as the logic IC
QS3VH253QG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH253QG Signal Switches / Multiplexers / Decoders applications.
- Logic circuits
- Idle motor
- Make half adder
- Robotic vehicles
- Injectors
- Code converters
- Automation system
- Telephone network
- Transmission from the computer system of a satellite
- To select different devices in microprocessor output
