QS3VH253QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 9 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| Low Level Output Current | 120mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 1 |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH253QG8 Overview
Due to the fact that it is provided in the QSOP, digital switch allows the board to be compacted.As part of its basic configuration, 16 terminations are designed as a part of it.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch contains 16 component pins.As a result, GULL WING represents the end of the conductors.The supply type of this multiplexer ic is Single.Currently, it is configured with a 16 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.Signal multiplexer provides 8 bits.This turn signal switch has 2 outputs designed for its operation.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.Without any external influences, it consumes 4mA current of multiplexer ic at all times.The performance of the multiplexers can be reliably maintained at a voltage of 3.3V.A resistance of 2 is used to operate the signal switching.It is possible to accept voltage levels by using one of the 4 input lines of multiplexers.Signal source consists of 1 output lines.The maximum operating temperature of 85°C is acceptable for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is required to operate the digital swith.In order to implement its logic, it makes use of IC BUS EXCHANGER.
QS3VH253QG8 Features
Supplied in the QSOP package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
4 input lines
1 output lines
BUS EXCHANGER as the logic IC
QS3VH253QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3VH253QG8 Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Control unit of Central Processing unit (CPU)
- VGA
- Relay
- Implementing boolean functions with multiple variables
- To select different devices in microprocessor input
- Code conversion
- To select different task for memory in microprocessor memory systems
- Medium scale TV wall
- Electronically controlled engine system
