QS3VH257PAG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 200 ps |
| Quiescent Current | 3mA |
| Turn On Delay Time | 9 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS EXCHANGER |
| Low Level Output Current | 120mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 1 |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS3VH257PAG8 Overview
In order to conserve board space, digital switch is included in the TSSOP.It is designed with 16 terminations as part of its basic configuration.For multiplexer's system, a voltage of 2.5V is supplied.A component pin count of 16 can be found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.In this case, Single is employed as the supply type.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Surface Mount.Signal multiplexer consists of 8 bits.There are 4 outputs designed for the operation of the turn signal switch.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.It consumes 3mA current of multiplexer ic since it is not affected by external factors.As far as the resistance is concerned, it operates with 2.Voltage levels are accepted through 2 input lines of multiplexers.As a signal source, there are 1 output lines.The signal switch can operate at a maximum temperature of 85°C.A temperature of the multiplexer of -40°C should be maintained for minimal operation.The signal switches is specified to operate at the maximum supply voltage of 3.6V in compliance with the applicable device specification.A minimum supply voltage of 2.3V is required to operate the digital swith.In order to implement its logic, it makes use of IC BUS EXCHANGER.
QS3VH257PAG8 Features
Supplied in the TSSOP package
Adopting a supply type of Single
2 input lines
1 output lines
BUS EXCHANGER as the logic IC
QS3VH257PAG8 Applications
There are a lot of Integrated Device Technology (IDT) QS3VH257PAG8 Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Small scale TV wall
- Steel plants
- HDMI applications
- Microprocessor instruction decoding
- Data communication
- Logic circuits
- Seven segment displays
- Transmission from the computer system of a satellite
- Frequency multiplexing system
