QS3VH384PAG
| Parameters | |
|---|---|
| Supply Type | Single |
| Bandwidth | 20MHz |
| Turn-Off Delay Time | 7 ns |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 8Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 120mA |
| Number of Bits | 10 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 7.5 ns |
| Output Characteristics | 3-STATE |
QS3VH384PAG Overview
Due to the lack of space on the board, digital switch is provided in the TSSOP.There is a design for terminating 24 as part of its basic configuration.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch has 24 component pins.As a result, conductors end at GULL WING.There is a supply type of Single employed as part of this supply.Currently, it is configured with 24 pins.This unit is mounted in the way of Surface Mount.The multiplexer ic provides 10 bits.Despite not interacting with external factors, it consumes 4mA current of multiplexer ic.The resistance of the signal switching is 2.A resistance of 8Ohm is used to operate it.85°C is an acceptable maximum temperature for this signal switch.Ideally, the temperature of the multiplexer should not exceed -40°C.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is required to operate the digital swith.The mux switch configuration contains 2 elements.IC BUS DRIVER is used for the logic of this chip.
QS3VH384PAG Features
Supplied in the TSSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
QS3VH384PAG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH384PAG Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- Transmission from the computer system of a satellite
- Enabling different functions units in microprocessor instruction decoding
- Memory system of computers
- VGA
- Electronically controlled engine system
- Data communication
- Medical industry
- Video transmission
- GLAN
