QS3VH861QG
| Parameters | |
|---|---|
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 10 |
| Propagation Delay | 200 ps |
| Quiescent Current | 4mA |
| Turn On Delay Time | 8 ns |
| Family | CB3Q/3VH/3C/2B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Low Level Output Current | 120mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 9Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
QS3VH861QG Overview
As a means of saving space, digital switch is provided in the QSOP.As part of its basic configuration, 24 terminations are designed as a part of it.The multiplexer's system is powered by 2.5V voltage.A component pin count of 24 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.This multiplexer ic is configured with 24 pins.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CB3Q/3VH/3C/2B family.Signal multiplexer provides 10 bits.For mux switch's normal operation, there is a power supply provided at 2.5/3.3V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 4mA current.2 is the resistance at which it operates.As far as the resistance is concerned, it operates with 9Ohm.A maximum temperature of 85°C is acceptable for this signal switch.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.In accordance with the applicable device specifications, the signal switches operates at a maximum supply voltage of 3.6V.A minimum supply voltage of 2.3V is required to operate the digital swith.It uses IC BUS DRIVER for its logic.
QS3VH861QG Features
Supplied in the QSOP package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
BUS DRIVER as the logic IC
QS3VH861QG Applications
There are a lot of Integrated Device Technology (IDT) QS3VH861QG Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- Used to connect a single source to multiple destinations
- Control unit of Central Processing unit (CPU)
- Audio transmission
- War field flying robot with a night vision flying camera
- Automatic Monitoring systems
- HDMI applications
- Night vision cameras
- Arithmetic Logic Units
- Medium scale TV wall
