QS4A101QG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 16 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 17Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Analog IC - Other Type | SPST |
| Power Dissipation-Max | 700mW |
| Power Dissipation | 700mW |
| Max Supply Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Turn-Off Delay Time | 6 ns |
| -3db Bandwidth | 1.4 GHz |
| High Level Output Current | 120mA |
| Off-state Isolation-Nom | 80 dB |
| On-state Resistance Match-Nom | 1Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS4A101QG8 Overview
Shipping overseas is convenient due to the electrical component's packing in QSOP. The advanced packaging method Tape & Reel provides high reliability. In total, 16 terminations have occurred. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 16 pins. As far as internal resistance is concerned, it has 17Ohm. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. It is generally not recommended to supply a voltage higher than 5.25V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 4.75V should be the lowest voltage fed to the electronic component. The switch multiplexer may be damaged if it is exposed to voltage greater than 3μA. It is integrated with SPST analog ICs. There is a voltage range of 5V operating voltages for the electrical part. Among the inputs that can be operated are the 4 inputs. Temperatures above 85°C should not be used to operate the switches.
QS4A101QG8 Features
1 Channels
-3db Bandwidth: 1.4 GHz
QS4A101QG8 Applications
There are a lot of Integrated Device Technology (IDT) QS4A101QG8 Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- Fiber to the Home
- Battery Powered Systems
- Avionics and Military Systems
- DSUs
- Isolation
- Sample hold systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- ATM
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
