QS4A105QG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 17Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Analog IC - Other Type | 4PST |
| Power Dissipation-Max | 700mW |
| Power Dissipation | 700mW |
| Max Supply Current | 3μA |
| Turn On Delay Time | 6.5 ns |
| Number of Inputs | 8 |
| Supply Type | Single |
| Turn-Off Delay Time | 6 ns |
| -3db Bandwidth | 1.3 GHz |
| Off-state Isolation-Nom | 60 dB |
| Height Seated (Max) | 1.75mm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
QS4A105QG Overview
Shipping overseas is convenient due to the electrical component's packing in QSOP. In total, 20 terminations have occurred. By its 2 channels, the electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. There is an electrical component included in the 20 series. As far as internal resistance is concerned, it has 17Ohm. For functions related to 20 pins, please refer to the datasheets. Multiplexers should not be powered above 5.25V in normal situations. An effective Single supply digital multiplexer. 4.75V is the lowest voltage the electrical component should receive. A voltage higher than 3μA may cause damage to the switch multiplexer. It is integrated with a 4PST analog IC. A voltage of 5V can be used to operate the electronic component. The 8 inputs need to be operated in order to work. The switches should not operate in an environment where the temperature is higher than 85°C.
QS4A105QG Features
2 Channels
-3db Bandwidth: 1.3 GHz
QS4A105QG Applications
There are a lot of Integrated Device Technology (IDT) QS4A105QG Analog Switches & Multiplexers ICs applications.
- ATM
- Cable PC
- Industrial and process control systems
- Residential Gateways, Home Gateway/Router
- Video signal routing
- Cross Connects
- Fault Tolerant Systems
- Channel Banks
- Data switching
- Audio and video signal routing
