RC4136N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | RC4136 |
| Pin Count | 14 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 5mA |
| Nominal Supply Current | 11.3mA |
| Slew Rate | 1.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 140nA |
| Voltage - Supply, Single/Dual (±) | ±5V~15V |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 109.54dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RC4136N Overview
Op amp is packaged in 14-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. A Tube case is used for delivering the op amp. It is estimated that there will be 14 terminations in the next few months. A total of 14 pins are attached to buffer op amp. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 14 pins. There is an input offset voltage of 6mV for this buffer op amp. It is recommended that this electronic component be mounted using the Through Hole mounting type. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureA supply current of 5mA can be used to operate this linear amplifier. Voltage gain should remain at 109.54dB. 4 channels are available on the instrumentation amplifier.
RC4136N Features
14 Pins
supply voltage of 15V
109.54dB voltage gain
RC4136N Applications
There are a lot of Texas Instruments RC4136N Instrumentational OP Amps applications.
- Automatic control
- Polarized electrodes
- Video data acquisition
- Navigation
- Precision measurement
- Active probe
- Automation control systems
- Automotive sensors
- Hand-held batteries
- Signal transformation
