RC4558IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | RC4558 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 5.6mA |
| Slew Rate | 1.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 109.54dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RC4558IPWR Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP (0.173, 4.40mm Width) case. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 6mV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 2.5mA . You should keep the voltage gain at 109.54dB for the time being. As a whole, there are 2 elements that make up this buffer amplifier. To pack the operational amplifier ics, TR is adopted as the packing method.
RC4558IPWR Features
8 Pins
supply voltage of 15V
109.54dB voltage gain
RC4558IPWR Applications
There are a lot of Texas Instruments RC4558IPWR Instrumentational OP Amps applications.
- High speed sample
- E-book readers
- Precision measurement
- Mobile phone
- pH (acidity)
- Division circuits
- Gaming industry
- Radiation thermometry transducers
- Automotive sensors
- Broadcasting
