RC4558PSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | RC4558 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 5.6mA |
| Slew Rate | 1.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 150nA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 109.54dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 6mV |
| Power | NO |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RC4558PSR Overview
There is a 8-SOIC (0.209, 5.30mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the General Purpose type. A Cut Tape (CT) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins on it. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 6mV for this buffer op amp. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges 0°C~70°C. This op amp can operate from a supply current at 2.5mA. Op amp is a member of the 109.54dB's 109.54dB family. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 15V. The instrumentation amplifier is packed in the form of TR.
RC4558PSR Features
8 Pins
supply voltage of 15V
109.54dB voltage gain
RC4558PSR Applications
There are a lot of Texas Instruments RC4558PSR Instrumentational OP Amps applications.
- Proportional counter tubes
- pH (acidity)
- Power control
- Video amplifiers
- Mobile phone
- Medical imaging
- Cinema or auditorium audio system
- Information processing
- Image computer boards
- Wireless base stations
