RC4559P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | RC4559 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 3.3mA |
| Nominal Supply Current | 5.6mA |
| Power Dissipation | 500mW |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 4MHz |
| Max I/O Voltage | 6mV |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
RC4559P Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp ic of the General Purpose type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 8 mark. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. It has 8 pins that make up the linear amplifier. Op amp ic rates 6mV for input offset voltage. For this electronic part, it is recommended that you mount it with type Through Hole. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. Using an 3.3mA supply current, this operational amplifier ics can be operated. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of instrumentation amplifier is rated 15V voltage.
RC4559P Features
8 Pins
supply voltage of 15V
RC4559P Applications
There are a lot of Texas Instruments RC4559P Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Biopotential
- Tablets
- Inverse/same-phase proportional circuit
- Measurements of Wheatstone bridge
- High input resistance broadband
- Laptop
- RF cable systems
- Voltage regulation circuit
- High gain DC amplifier
